Cows to the operation of the angle
Diancai Fleeting Time Pu′erh Ripe Tea,Puer Tea,Organic Tea Prettyfly Technology Co., Ltd. , http://www.prettyflytea.com
Electric iron dehorning: The electric iron used for dehorning cows is specially made. Its tip is cup-shaped and its size is the same as the bottom of the yak horn. After the electricity is heated, the temperature of the parts of the soldering iron is the same, and there is no phenomenon of overheating or overcooling. When using, place the top of the soldering iron on the yak horn for 15 to 20 seconds. Cows do not bleed when dehorning with electric iron. They can be carried out in any season of the year. However, this method is only suitable for calves within 35 days of age. Caustic Potassium Removal: Caustic Potassium (potassium hydroxide) is best for dehorning cows. This medicine is available in chemical stores. It needs to be stick-shaped and some medical petrolatum must be prepared. The following steps can be performed to remove the corners: First, cut off the corner base and the surrounding hair. Second, apply Vaseline around the base of the yak horn to prevent the applied caustic potash solution from flowing into the eyes. Third, use caustic pots (hands must be wrapped in cloth or paper to prevent burns) smear and rub at the base of yak horns until bleeding. This is done to destroy the growing point of the horn, so it must be done carefully. If the application is not complete, some of the keratinocytes will not be destroyed and the horn will still grow. Using caustic potash to dehorn cows must be done within 3 to 20 days of calf. Yak using this method to dehorn, in the early dehorning phase must be isolated from Other yak, while avoiding the rain, or parts of the caustic potash washed by the rain, the caustic potash liquid will flow to the eyes and Face, causing damage to yaks.