Baby Newborn Neonate Radiant Infant Warmer
Medical Package Bag for packaging of medical device products,they can be sterilized, can be aseptically handled(eg,clean opening),can provide acceptable microbial barrier properties,can be protected before and after sterilization,and can be sterilized after sterilization.A packaging system that maintains the sterile environment of the system within a certain period of time(labeled validity period). Medical Package Bag Medical Package Bag,Roll Shape Package Bag,Sterilization Package Bag,Plastic Medical Package Bag Henan Sanqiang Medical Equipment Liability Co.,Ltd , http://www.sterilizers-china.com
Model No.:MSLBI10
Â
Power supply: ~ 220V, 50/60 Hz Power input: 1000VA Environment temperature: 18ºC~30ºC Relative humidity: 30%~75% Atmospheric pressure: 700~1060hPa Air velocity: <0.3m/s Temperature control range: 32ºC~38ºC Precision of temperature control: ≤0.5ºC
Infant radiant warmer of model MSLBI10 adopts anti-explosion micro crystal quartz infrared radiation tube for its radiation source. In its instruction, the radiator can rotate freely in about ±90 degree both in counter-clock and direct-clock, the obliquity of the bed can be done continuously and is controllable, there is a X ray black-box shelf under the bed. Infant radiant warmer of model MSLBI10 has three operation modes: pre-heat, auto and manual, the Indicator shows under which mode the equipment is running, the testing temperature and setting temp is shown independently in the screen, the light for caring the baby uses LEDs lamp, the angle in the direction of both front and back can be controlled. The equipment will alarm with sound and light if failure and exceptional situation comes out when using the infant radiant warmer.
This instruction consists of instruction of usage and techniques, and is suitable for the installation, usage, cleanout, maintenance and analysis and solution of common failure of infant radiant warmer of model MSLBI10.
Some parts of the products used may not be the same as the ones in the introduction list and circuit diagram, that is because our company put improved parts and circuits into use before putting them into printed introduction.
Â
Neonate Radiant Infant Warmer for baby Newborn resuscitation infant phototherapy unit
Model No.:MSLBI10
Â
Power supply: ~ 220V, 50/60 Hz Power input: 1000VA Environment temperature: 18ºC~30ºC Relative humidity: 30%~75% Atmospheric pressure: 700~1060hPa Air velocity: <0.3m/s Temperature control range: 32ºC~38ºC Precision of temperature control: ≤0.5ºC
Infant radiant warmer of model MSLBI10 adopts anti-explosion micro crystal quartz infrared radiation tube for its radiation source. In its instruction, the radiator can rotate freely in about ±90 degree both in counter-clock and direct-clock, the obliquity of the bed can be done continuously and is controllable, there is a X ray black-box shelf under the bed. Infant radiant warmer of model MSLBI10 has three operation modes: pre-heat, auto and manual, the indicator shows under which mode the equipment is running, the testing temperature and setting temp is shown independently in the screen, the light for caring the baby uses LEDs lamp, the angle in the direction of both front and back can be controlled. The equipment will alarm with sound and light if failure and exceptional situation comes out when using the infant radiant warmer.
This instruction consists of instruction of usage and techniques, and is suitable for the installation, usage, cleanout, maintenance and analysis and solution of common failure of infant radiant warmer of model MSLBI10.
Some parts of the products used may not be the same as the ones in the introduction list and circuit diagram, that is because our company put improved parts and circuits into use before putting them into printed introduction.
Â