Cans sealing machine routine maintenance precautions

The can sealing unit is suitable for the filling and sealing of the steamed cans in the beer and beverage industry. It is an independent filling and filling of steam-containing cans based on the digestion and absorption of advanced beer cans filling and sealing machines at home and abroad. unit. The filling and sealing of the tank is designed as a whole. The filling system of the can sealing machine is provided by the sealing system to ensure the absolute synchronization and coordination of the two. Adopting the most advanced machinery, electrical appliances and pneumatic control technology, using the principle of isostatic filling and filling, the filling speed is fast, and the liquid level stable material loss after filling is small, the sealing quality is good, the whole machine runs smoothly, and the shape is beautiful and generous. , convenient operation and maintenance, production speed and frequency control.

Daily maintenance precautions for cans sealing machine:

First, the can sealing machine adjusts the distance between the tray and the indenter: loosen the cap on the lower end of the tray (screw), rotate the tray, and take the contact between the head and the lid as the base point. Rotate the tray up 2 - 3mm to tighten the cap.

Second, adjust the distance between the indenter and the sealing wheel: firstly adjust the left and right distance between the indenter and the first sealing wheel, based on the distance between the sealing wheel and the indenter of 0.5 mm, the indenter and the sealing wheel do not rub against each other. The smaller the distance, the better; adjust the upper and lower distance between the indenter and the first sealing wheel, and the lower end of the sealing wheel and the upper end of the pressing head shall be the minimum gap that does not contact. Next, adjust the distance between the indenter and the second sealing wheel in the same way.

Third, the gap between the indenter and the sealing wheel of the can sealing machine can be adjusted according to the hardness of the cover. The iron cover can be adjusted closer. The aluminum cover can be adjusted farther. After the adjustment, the fixing screws are locked, and the test seals are 2-------3. After checking the standards, the machine can work continuously.

Fourth, each time the tank type is changed, the pressure head and the tray can be replaced according to the size of the lid.

Fifth, mechanical maintenance: the motor can not be lack of phase, the gear transmission part is added with lithium-based lubricating oil once a month, the motor spindle is running and the tray is not lifted, and the V-belt is adjusted or replaced.