How to set the production line mode for laser printer

In order to cooperate with the production line production mode, the laser printer is also equipped with the corresponding pipeline marking mode under the combination of computer technology information, which not only ensures the marking speed, but also has no influence on the marking effect. Then, if you want to set the pipeline mode of the laser printer, the following steps are taken to debug the system by taking the fiber laser printer as an example;

(1) Jog control module; click the button to enter the jog control module. This module of the laser printer is mainly used for jog control of each axis. After setting the card number, axis number and motion parameters, click the button.

(2) The IO control module clicks the button to enter the IO control module. I/O test module interface. Laser printer, fiber laser printer, semiconductor laser printer, carbon dioxide laser printer. The price of the laser marking machine is in this module. The user can view the status of the universal input port and the dedicated input port. The red light indicates the high level input, the green light indicates the low level input, and if it is wrong, the blue light is on.

In the dedicated input, the check box after each signal is used to set whether to enable the dedicated input port, the selected indication is used as a dedicated input, and the cancel indication is used as a universal input port. Two radio blocks, active high and active low, can be seen after the alarm signal to set the trigger level of the dedicated input signal. The button below the interface is used to set the signal of the 24 universal output ports, and the initial button is red, indicating that the corresponding output port is in the off-off state (all common output ports are OC gate output mode).

After clicking, it turns green, indicating that the corresponding output port is in the on-ON state (conducting with the externally input 24V power ground). The default axis dedicated signal of the control card is active high. In this program, the axis signal is set to low level for easy debugging. Please pay attention to the user's use. At this time, the state of the marking of the laser marking machine of the assembly line is basically debugged.

(3) Command test module Click the button to enter the IO control module. In the command test module, the user can view and test all the functions provided by the MPC2810. In the process of using the laser marking machine software, the user only needs to select the function name in the list box, double-click the corresponding parameter box, input the correct parameters, and then click the button to execute the corresponding instruction. If it is a running motion command, to stop the motion, just click on the corresponding buttons in the back. If you find that the function does not work properly after clicking Run, you can find get_last_err in the function list box. Run the function to get the error code, check the error code table in the programming manual to understand the cause of the error.

(4) Parameter setting module Click the setting menu in the menu bar, and the parameter setting dialog interface will pop up. In this module, the user can modify the pulse output mode, feedback and other parameter settings. Modify the parameters and click the OK button to complete the operation. Upon reaching this step, the system commissioning of the fiber laser printer for the pipeline mode is completed.