Some of the BVM-20 air shock wave tester in aerospace power high pressure air test application
BVM-20 air shock wave tester Impact channel 1, impact channel 2. Product introduction:   The engineering blasting and mechanical impact impact compression on the surrounding air, and the pressure wave forming the dynamic fluctuation is higher than the free air, which may cause damage to buildings or structures within a certain distance. The instrument is currently the best performance air shock wave test in China. Instrument, already  Widely used in aerospace, highways, railways, bridges, dams, buildings, tunnels, quarries, mines, directional demolition and other engineering sites with air impact monitoring needs. At the same time, it has also been used by domestic universities, research institutes and supervisors for scientific research and teaching and impact environmental supervision and evaluation. l      People's Republic of China manufacturing measuring instruments license l       Designed according to the requirements of GB6722-2003 Blasting Safety Regulations; l   Quantitative impact: Dp specific impulse, positive pressure action time, overpressure, full waveform event l   through    Road: 2 channels using overpressure (shock wave) detector l   the amount    Cheng: 0 ~ 5MPa or 0 ~ 10MPA l   Resolution: 0.01Mpa l   Test accuracy: +/-10% or +/-1dB, l Display accuracy: 0.001% l Frequency response: 0 ~ 1000Hz , l Cable length: standard configuration l Maximum cable: record Record mode:   Automatic mode, unattended, Trigger gate valve: 0 ~ 0.2Mpa (normal impact test) or 0.001Mpa ~ 5Mpa or 0.001Mpa ~ 10Mpa (EHV impact test) Sampling Rate:   20,000 samples /s (independent of recording time) Recording time:   Intelligent matching according to overpressure signal for any length of time storage:   2GB storage space, 1000 full waveform events Cycle Time:   Recording will not be interrupted due to event processing, zero time lag Stop mode:   Automatic segmentation stop Physical parameter ruler    Inch:  158 x 115 x weight    the amount:  Electricity    Pool:  Continuous monitoring for more than 72 hours PC interface:  RJ45 standard network interface warranty period:  2- year warranty (lifetime warranty) User Interface:  Square touch button 6 button control Display    Show:  3.5 inch Chinese interface display Use environment Overload pressure:  10MPa or more temperature    degree:  wet    degree:  Non-condensing environment waterproof level:  IP67 industrial and waterproof Software software File Management : Automatically download, store, print and shrink multiple formats of archives General Report : Customized Event Report, Full Color, Single Page Report FFT report : Analyze the frequency capacity of the waveform and automatically calculate the dominant frequency Monitoring and evaluation : the degree of damage to exposed buildings and structures Parameter calculation : typical blasting safety distance calculation  
Main Specifications