Digital water bath thermostat maintenance

1. During continuous operation, the instrument should do a regular inspection every three months: check whether water droplets, dirt, etc. fall into the motor and control components; check the water quality and cleanliness in the water tank; check the fuses, control components and tight Solid screw.

2. Proper use and attention to the maintenance of the instrument, so that it is in good working condition, can extend the life of the instrument.

3. The bearing of the oscillator transmission part has been filled with the proper amount of grease (No. 1 calcium-sodium base) before leaving the factory. During the continuous operation, the instrument should be filled with grease once every six months. The filling amount is about the bearing space. 1/3.

4. After long-term use of the instrument, natural wear is a normal phenomenon. After using the instrument for one year, if the motor is found to have abnormal noise, the heating system is abnormal, the transmission part is worn, the belt is loose or cracked, the heating constant is abnormal, the electronic control component is invalid, etc. If there is any problem with the products purchased by Da Instrument, the company will assist you.