Can the rotary sieve rotary vibrating sieve screen the fishmeal Chinese medicine powder?

Rotating Screen Rotating Vibrating Screen Rotating Screen Rotating Vibrating Screen Mainly applicable to the industry:

Chemicals: Resins, coatings, pigments, rubber, carbon black, activated carbon, cosolvents, gums, Yuanming powder, polyethylene powder, quartz sand, etc.
Medicines: Chinese medicine powder, western medicine powder, pharmaceutical raw material powder, etc.
Food: sugar, salt, monosodium glutamate, starch, milk powder, soy milk, fruit juice, rice flour, dehydrated vegetables, fruit juice, yeast liquid, pineapple juice, fish meal, food additives, etc.
Kiln industry: glass, ceramics, porcelain mud, abrasive materials, refractory bricks, kaolin lime, mica, alumina, calcium carbonate (heavy).
Metallurgy: lead powder, zinc oxide, titanium oxide, foundry sand, diamond powder, aluminum powder, iron powder, various metal powders, etc.
Pollution treatment categories: wastewater, waste oil, excrement, etc.
Rotating vibrating screen structure diagram:

Rotary sieve rotary vibrating screen installation and commissioning
1. The installation of the vibrating screen should have a stable foundation. When the vibrating screen is installed on the general ground or cement foundation, the anchor bolts may not be provided. When the vibrating screen is installed on the steel structure frame, the bolts are fastened to the steel structure, and the steel structure frame should have a certain degree of steel.
The screen machine only needs one-phase switch (remark: it is best to use the electric control panel), thread the snake-skin tube and connect the motor to the power supply. Note that the electric control panel should be suspended and mounted on the wall.
2, the company's rotary vibrating screen has been installed before leaving the factory. During the use of the screen, the screen can be replaced by itself, and the screen replacement is simple and quick.
3. Before starting the machine, first check the tightening degree of each compression bolt, and whether the position of each material port is aligned with the feeder, and observe whether the vibration motor can rotate normally and whether the spring force is blocked or not. Check each layer. Whether the screen is tight.
4. Before the cyclone sieve is connected to the electrical control panel, the electrical control panel should be inspected first. After the line is connected, observe whether the direction of rotation of the vibration motor is clockwise. (Note: Otherwise, the phase sequence should be changed) Whether the operation is normal or not.
5. Adjust the phase angle of the upper and lower eccentric blocks of the vibration motor to adapt to the screening of various materials.

Rotating screen Tips:
Rotary sieve vibrating screen Before connecting three-phase 380 volt power supply and before use, please remove the transportation support above the base of the vibrating screen and then use it for debugging. For the first time, please use a small amount of uniform feeding, and gradually increase it gradually. The actual weight that can be screened to the sieve.