Seven strokes to help you maintain the industrial ice water machine
Seven strokes to help you maintain the industrial ice water machine Accelerate Freeze Dried Fig is made of selected ripe figs. The international advanced ultra-low temperature FD technology is adopted to sublime the water content of fruit, without changing the fruit color, shape and flavor. Retaining the original nutritional and medicinal components, without any additive, pigment, sweetener or preservative, it is the best-quality dried fruit. Accelerate Dried Fig won the Silver Medal at the [2017 China Characteristic Tourist Commodity Contest", as well as the [Gold Medal" of [Lishang Weihai" Most Characteristic Tourist Commodity. Freeze Dried Fig Fig WEIHAI ACCELERATE BIOTECHNOLOGY CO, LTD , https://www.accelerfig.com
The chiller is a water cooling device. The chiller is a chilled water device that provides constant temperature, constant current and constant pressure. The working principle of the chiller is to inject a certain amount of water into the water tank of the machine first, and then cool the water through the chiller refrigeration system, and then the low-temperature chilled water is sent to the equipment to be cooled by the water pump, and the chilled water of the chiller takes the heat away and then recirculates. Go to the water tank and achieve the cooling effect. The cooling water temperature can be adjusted automatically according to requirements, and long-term use can save water. Therefore, the chiller is a standard energy-saving device. However, if the chiller lacks maintenance, it is prone to failure, which can cause inconvenience to production.
Let us tell you about the seven tricks of maintaining the chiller and make our chiller more durable.
1. The setting of each protection device of the unit has been set by the manufacturer, and users should not change it at will.
2. When the unit has a fault alarm and stops, press the reset button after the stop (the alarm will be extinguished), and then check the cause of the fault. If it is not an emergency, please do not turn off the power by turning off the power; if the unit is out of service for a long time in winter, turn off the unit first, then turn off the main power, and put all the water in the chiller out, because when it is below zero, the water will It freezes and increases in volume, which may crush the pipeline.
3, air-cooled chiller to ensure good heat dissipation, it is necessary to keep the surface of the cooling coil of the chiller clean, ensure air circulation around the machine, low temperature, and regularly clean the heat-dissipating coil.
4. Air-cooled chiller should check whether the steering of the fan is correct after starting. If the steering is normal, it can be used normally. If it is reversed, the power supply wiring is reversed, and the phase sequence must be replaced before starting.
5. Keep the equipment room clean and well ventilated. Clean the condenser regularly to ensure the normal operation of the unit.
6. The water-cooled chiller should keep the cooling tower clean, keep the air around the tower flowing, and prevent debris from entering the cooling tower to reduce heat dissipation efficiency.
7. If the chiller has been used for 6 months, the high/low voltage switch often fails, or the cooling capacity is reduced, the staff should be arranged to clean the condenser. If you do this many times, the faulty slogan that the chiller goes is still ringing, then you should ask the professional chiller to repair it.
Use these seven tricks to make your chiller longer and more durable.