Rat insulin-like growth factor binding protein-2 (IGF-BP2) ELISA kit instruction manual

Shanghai Xitang Biotechnology Co., Ltd. 021-55229872, 65333639
Rat insulin-like growth factor binding protein -2 (IGF-BP2) ELISA kit instruction manual
  ( used in serum, plasma, cell culture supernatants and other biological fluids )
principle
This experiment used double antibody sandwich ABC-ELISA. The anti-rat IGF-BP2 monoclonal antibody was coated on the plate, the IGF-BP2 in the standard and the sample was combined with the monoclonal antibody, and the biotinylated anti-rat IGF-BP2 was added to form an immune complex. On the horseradish peroxidase-labeled Streptavidin combined with biotin, the substrate working solution is blue, and finally the stop solution sulfuric acid is added, and the OD value is measured at 450 nm. The IGF-BP2 concentration is proportional to the OD value, and can be passed. A standard curve was drawn to determine the concentration of IGF-BP2 in the specimen.
Kit composition ( 2-8 ° C preservation)
Coated Wells
96 holes
Enzyme Conjugate
12ml
10× specimen dilution (Sample Buffer)
12ml
20×Wash Buffer
50ml
Standards: 500ng/bottle
2 bottles
Substrate working fluid (TMB Solution)
12ml
Primary antibody working solution (Biotinylated Antibody)
12ml
Stop Solution
12ml
Prepare reagents and collect blood samples
1. Collection of specimens: serum, plasma (EDTA, heparin anticoagulation), cell culture supernatant, tissue homogenate, etc., as soon as possible, stored at 2-8 ° C for 48 hours; longer time must be frozen (-20 ° C or -70 ° C ) Save to avoid repeated freezing and thawing. Before the normal specimen is measured, dilute at least 1 : 10 with the specimen dilution (take 20ul, add 180ul of the standard dilution, and dilute 10 times).
2. Standard solution preparation: Add 0.5 ml of distilled water before use and mix to form a 1000 ng/ml solution. Set the standard tube 8 tube, the first tube plus the standard dilution 900ul, the second to the eighth tube to add the sample dilution 500ul. Add 100 ul of 1000 ng/ml standard solution to the first tube, mix and aspirate 500 ul with the sampler, and transfer to the second tube. Repeat the dilution as described above, and remove 500 ul from the seventh tube and discard it. The eighth tube is a blank control.
3. The 10× specimen dilution was diluted 1:10 with distilled water (example: 1 ml concentrated dilution + 9 ml distilled water).
4. Washing solution: diluted 1:20 with distilled water (example: 1 ml concentrated washing solution added to 19 ml of distilled water)
Test procedure
1. Loading: Add 100 ul of standard or sample to be tested in each well. Mix the reaction plate thoroughly and let it stand at 37 °C for 120 minutes.
2. Wash the plate: Wash the plate thoroughly with washing solution 4-6 times, and dry it on the filter paper.
3. Add 100 ul of the first antibody working solution to each well. The reaction plate was thoroughly mixed and placed at 37 ° C for 60 minutes.
4. Wash the board: the same as before.
5. Add 100 ul of enzyme-labeled antibody working solution per well. The reaction plate was placed at 37 ° C for 30 minutes.
6. Wash the board: same as before.
7. Add 100 ul of substrate working solution to each well and let it react at 37 ° C for 15 minutes in the dark.
8. Add 100 ul of stop solution to each well and mix.
9. Measure the absorbance at 450 nm using a microplate reader within 30 minutes.
Result calculation and judgment
1. All OD values ​​should be subtracted from the blank value before calculation.
2. Using standard products 100, 50, 25, 12.5, 6.25, 3.12, 1.56, 0 ng/ml as the abscissa and OD as the ordinate, plot on the coordinate paper and draw the standard curve.
3. According to the OD value of the sample, find the corresponding IGF-BP2 content on the graph, and then multiply the dilution factor.
Kit performance
1. Sensitivity: The minimum IGF-BP2 detection concentration is less than 1 ng/ml.
2. Specificity: Recombinant or natural rat IGF-BP2 can be detected simultaneously. Does not cross-react with other cytokines in rats.
3. Repeatability: The coefficient of variation in both the plate and the plate is less than 10%.
Precautions
1. It is recommended to make double holes for the above standard holes and samples to be tested. The standard curve should be made at the same time for each measurement.
2. The washing process is critical. Insufficient washing will result in an accuracy error and an erroneous rise in the OD value.
3. After the slats are opened, the remaining slats should be sealed again to keep the slats dry .
4. This kit should be stored in a 4oC refrigerator.
5. This kit is for scientific research only and cannot be used for clinical diagnosis!

Orlistat is a long-acting and potent specific gastrointestinal lipase inhibitor. It is white or off-white powder at room temperature. It is insoluble in water, soluble in chloroform, and easily soluble in ethanol. It passes through the stomach and small intestine cavity. Intragastric lipase and pancreatic lipase active codon form a covalent bond to inactivate the enzyme. Fat in food cannot be broken down into free fatty acids and monoacylglycerols, so the fat cannot be absorbed and utilized, thereby reducing the body's caloric intake and controlling body weight. This medicine does not need to be absorbed through the body to exert its effects. At the usual dose, fat absorption can be suppressed by 30%. It is rarely absorbed after oral administration and can be metabolized and inactivated in the intestine. The metabolic site is on the wall of the gastrointestinal tract, and the elimination half-life is about 14 to 19 hours. About 97% of this product is excreted with feces, of which 83% is excreted in the original form.

Orlistat can be used clinically for obesity and hyperlipidemia. Under normal circumstances, 120mg can be taken orally once a day, three times a day, and taken within one hour after a meal. After taking the medicine for 2 weeks, the weight may start to decrease. It can be taken continuously for 6 to 12 months. If the dose is increased to more than 400 mg per day, its effect will no longer be enhanced.

Orlistat

Orlistat Dosage,Orlistat Weight Loss,Orlistat Function,Orlistat For Weight Loss

Jinan Prosperity International Trade Co. Ltd , https://www.jnprosperity.com