Talking about the Reasons for the Damage of the Conveyor Belt
The production of the rib conveyor belt from the production of the base belt to the completion of the entire belt, the intermediate link step by step is compact, and any link can not be wrong. The main production steps: 1. Baseband: baseband production, joints, skirts and partitions 2, skirts: skirt production, skirt base hair 3, partitions: production of partitions, partitions base hair 4. Secondary Vulcanization Production of Skirts, Partitions and Base Strips 5, maintenance 6, qualified storage The secondary vulcanization process is more complicated, from the use of glue to the mold, to the worker's operation, etc. Any mistakes may affect the later use. Corrugated conveyor belt vulnerable parts: 1, baseband A, edge delamination: 1) belt deviation; 2) friction of the guide vertical roller; 3) quality problems B. Non-working surface scratches: 1) scratches during production; 2) scratches during transportation; 3) scratches during installation; 4) scratches during use 2, skirt A. Skirt tear: 1) The back roller is rubbed and teared, there is no double idler (empty idler, base tape is not rigid); 2) The drum diameter is too small B. Skirt base debonding: 1) Scratch during use; 2) Drum diameter is too small; 3) Quality problem 3, partition A, separator off: 1) under the back section of the roller friction tear, there is no double idler (empty idler, baseband no rigidity); 2) quality problems B. Breaking of partitions: 1) The idler rolls tear under the return section, and there is no double idler (empty idler, base tape is not rigid) In short, no matter in the production and use, the manufacturing process and use and maintenance of the rib conveyor belt should have relative measures. Quality is neither imposed on manufacturers nor imposed on users. It is the common responsibility of everyone.
Leo Group Company is the largest and most powerful technology manufacturing enterprise. Our production line including refrigerated milk cooling tanks, milk storage tanks, milking machines. Road Milk Tanker and TMR feed mixers. LEO Group which restructured by a former military enterprise in 1999, and gradually developed into a research and development, design and manufacturing, sales and engineering, installation and service in an integrated group of companies, becomes the China Dairy Industry Association member units, the Ministry of Agriculture in 2009 was listed as agricultural sentinel the
enterprises.
Feed Mixer,Horizontal Tmr Feeding Mixer,Horizontal Tmr Mixer,Horizontal Animal Feed Mixer Henan Leo Husbandry Equipment Science and Technology Co.ltd , https://www.chinaleodairy.com At present, the quality of corrugated rib conveyor belts produced in China is uneven, and the base belts have not reached the corresponding lateral rigidity; the skirts and the separators and the base tapes have not reached the relative adhesiveness; the use of manufacturers simply has no maintenance; equipment manufacturers Weary and so on. Therefore, the reason why the quality of the rib conveyor belt is worse than that of the ordinary belt is.
