Instructions and precautions for shaking the incubator
The fruit, corn, contains a lot of magnesium, which is known to be one of the few trace elements in the food and can help prevent cancer development.And the fruit corn contains a substance called glutathione, which can make some chemical carcinogens in the body toxic.To ward off cancer.
Although corn is highly nutritious, it is rich in crude fibre, so for children with delicate stomachs, too much of it can easily cause indigestion. If you add milk to the juice and then give it to your child, it will be less taxing on the stomach and more nutritious, and your child will be able to eat more food. (This method uses a wall breaker, but if you don't have one, a juicer is fine.)
If you would like to work with us, please send us a message on the website or contact us by email.
Delectable Sweet Corn Kernel,Sweet Corn Cob Kernels,Storing Fresh Corn Kernel,Baked Sweet Corn Kernels Jilin Province Argricultural Sister in Law Food Co., Ltd. , https://www.nscorn.com
First, the oscillation incubator function:
It is controlled by microprocessor and has functions of monitoring, controlling temperature and protection. The inside of the box can observe the culture in the box. Stainless steel liner, never corroded.
Second, the structure of the shaking incubator:
1. The outer box of the equipment is cold-rolled steel plate, the surface is electrostatically sprayed, the inner tank is stainless steel, the insulation layer is formed by polyurethane foaming, and the light-transmissive window is double-layered to ensure the insulation performance inside the box (low temperature culture) Boxes and BODs require opaque incubators without glazing. The inside of the cabinet has cold and hot airflow ducts to make the gas circulation in the tank smooth and the temperature more uniform.
2, the equipment temperature control system, intelligent application of advanced electronic circuits to achieve analog control. The self-adjusting PID system is adopted, and the heating execution system adopts the “zero-crossing†non-contact switching circuit technology, thereby realizing the pulse width modulation heating, so that the temperature control fluctuation range is less than or equal to 1 °C.
Third, the use of instructions:
1. Conditions of Use:
A, ambient temperature: 10-30 ° C;
B, no strong light, no strong corrosive gas, good ventilation, relative humidity below 85%;
C, use power: 200V ± 10%, 50HZ. The power capacity is not less than 1KW, and the grounding power socket is provided;
2. Instructions:
A. Turn on the power: Insert the three-pin plug into the power socket and set the power switch on the panel to the “on†position. At this time, the meter displays a digital display indicating that the device is in working condition.
B. Set the experimental temperature according to the temperature setting method (additional temperature control manual), and start working after the temperature is constant.
C, intelligent and special requirements additional instructions for use.
D. When the shaker is needed to work, turn on the power switch of the shaker and adjust the speed knob to the required speed.
E. For detailed settings, please refer to the instrument manual.
Fourth, note:
a) The movement of the equipment should be moved in parallel, and the inclination angle in any direction should be less than 45 degrees.
b) After the equipment is grounded, if the ground is not flat, it should be leveled.
c) If the equipment is not used for a long time, the power cord should be removed to prevent the equipment from being charged and injuring people. It should be operated regularly (usually in the first quarter) for 2-3 days according to the conditions of use to remove moisture from electrical components and to avoid damage to the device.
d) The wall of the tank wall and the surface of the equipment should be wiped frequently to keep it clean.
e) When the equipment is in normal operation, the load placed in the box should not affect the air circulation to ensure uniform temperature inside the box.
f) If the equipment fails, it should be repaired by a professional or manufacturer.
