Livestock and poultry manure organic fertilizer is not detrimental to the harm

Livestock and poultry manure organic fertilizer is not detrimental to the harm
1. Infectious diseases and insect pests, domestic waste, and other organic materials contain coliforms, nematodes and other pathogens and pests. Direct use leads to the spread of diseases and pests, crop diseases, and affects the human health of edible agricultural products. Unripe organic materials are fermented in the soil. At this time, it is easy to breed bacteria and insect pests, as well as the occurrence of plant diseases and insect pests.
2. Fermented raw materials such as unfermented raw manure are applied to the ground. When the fermentation conditions are met, the fermentation is performed under the action of microorganisms. When the fermentation site is closer to the root and the crop plants are smaller, the heat generated during the fermentation will be Affects crop growth and causes plant death in severe cases.
3, toxic gas hazards in the decomposition process produces methane, ammonia and other harmful gases, so that the soil and crops produce acid damage and root damage.
4. Soil oxygen-deficient organic matter consumes oxygen from the soil during the decomposition process, temporarily leaving the soil in an anoxic state, which will inhibit crop growth.
5. Fertilizer Slowness The nutrients in unfermented and decomposed organic fertilizers are mostly organic or slow-acting. They cannot be directly absorbed and utilized by crops. Only the decomposition and conversion to the quick-effect state can be absorbed and utilized by crops. Therefore, direct application of unfermented fertilizers will slow down the fertilizer efficiency.
6. It can be directly used without treatment. The organic material is bulky, the active ingredient is low, transportation is inconvenient, and the use cost is high.

In order to solve the above drawbacks, Beijing Huaxia Kangyuan Science and Technology Co., Ltd. has developed a decomposer of organic fertilizers that can eliminate odors effectively and quickly.

Road Milk Tanker (Milk Tank trailer)5-60tons:

All the heads are one time moulding . And all the inner Rcorners are larger than 30mm.To ensure there is no right-angle inside the tank. the insulation layer PUF. Temperature raise less than 2°C within 24 hrs:

1.About the material: 

AISI/SUS 304-2B(S.S304)food grade stainless steel plate sheet ,inside shell 2.5-3mm / outer shell  2mm, one time molding heads.

2 .Special welding process :

TIG welding process, to obtain the good outlook and reduce the crack and pit. All surface can be polished shinning like mirror.

3.One time molding heads  and injecting PUF or use fiber glass.

And each compartment use double heads back-to-back which make sure every compartment heads smooth and no right-angle left,easy to wash.

Using polyurethane foam(PUF) /glass fiber to get better insulation ability, which has the perfect warmth keeping ability and ensure temperature raise not too fast

4.Milk out-let pipe and air vent

Each milk compartment has one set separate out-let pipe and air vent.out-let pipes which usesΦ50×2.0 polished stainless steel (sanitary parts), all pipes inside the insulation layer to make sure no frozen milk occurs in winter and no milk rotten in summer.

5.The CIP cleaning system

Equipment with automatic self-rotation ball(spray cleaning ball) inside the tank, and CIP joint in rear carbin.

6. Rear cabinet  for tools/pipe /pump/and milk sampling.

The lockable rear cabinet design make the tanker have a tidy general look.and convenient for use/you add other device( according yourdesign).

7.The design of the manhole cover

All the covers are Anti-Spillage design, to avoid the over flow and leakage of the milk from top cover.

8.The Top anti-skid platform.

Anti-skid platform on the top of tank body made of Aluminium alloy plate with skid-resistant surface. For safyty.the anti-skidplatform with Φ25mm handrails(S.S) of 250mm height.

9.The breath airway(air vent):

Air vent diameter no less than Φ120mm.

10 .The tank body design:

The scientific long axis and short axis design for tank body meets the hydrokinetics requirements and ensures the safety of vehicles.and we can design the tank according your trailer(truck) size.

11 .The chassis of the vehicle

The vehicle chassis standard FAW chassis.or we provide semi-trailer chassis according your demand.

road milk tanker

Road Milk Tanker

Milk Tanker,Road Milk Tanker,Milk Tanker Trailer,Transport Milk Tank Truck

Henan Leo Husbandry Equipment Science and Technology Co.ltd , https://www.chinaleodairy.com