Corncob with Pleurotus ostreatus
It is estimated that 100 kg of corn cobs can produce 100 kg to 150 kg of fresh mushroom, and the bioconversion rate is 150% to 250%. Material selection and processing: The corncob that was fresh and without mildew in the year was exposed to sunlight for 2 to 3 days and crushed into corn kernels without sieving. Loading and inoculation: When the material temperature drops below 30°C, it can be bagged and 5025 cm polyethylene bag is used to inoculate according to the three-layer material four-layer inoculation method. Stratum strains, strains inoculated 3:2:2:3, seeding weight 10% to 15% of the material weight, the species of material received after the bag to the sides, upward accumulation, height 1.5 to 2 Meter. Cultivation of mycelium: 2 days after sowing, the temperature of the material began to rise, and attention was paid to changes in the temperature of the material. After 2 days to 3 days, the reactor was turned to a heap. After 6 days to 7 days, the reactor was turned over again to prevent the temperature of the material from rising above 35°C. When the material temperature rises to 32°C, the doors and windows should be opened in time to spray water on the ground to reduce the accumulation level, and the bacteria bags should be scattered to disperse the heat in the bags quickly to reduce the temperature of the material. The temperature of the bag should be controlled at 25°C. About 10 days or so, the bag turns 180 degrees, so that the bottom of the stagnant water, in order to facilitate the uniform germs, about 20 days and then bag down, put the mycelium growth good bacteria bags together, poorly placed Together, it was contaminated and the pollution was light. Open the bag mouth and put it in the shade for a few days or use lime powder to cover it. The relative humidity of the indoor air is kept at about 65%. Generally, after 30 days, the mycelium can be filled with bacteria bags. Mushroom management: When the material surface is covered with white hyphae, the zigzag on both sides of the bag can be unlocked, the bag mouth is rolled outwards, ventilation is enhanced, the room temperature is maintained at 14°C to 18°C, and the relative air humidity is controlled at 80%. To 90%. Do not spray water buds, when the young mushrooms should be a small amount of water, grow to the size of beans, the number of water spray to increase, maintain air humidity 90%, at 10 °C to 25 °C under 5 to 7 days can be harvested. The Temperature Device includes the Temperature Device(Infrared Temperature Device) for the industry and the Temperature Device for human beings. Sanan Technology mainly runs the Temperature Device for human beings and we hope our Temperature Device could help in front of the COVID-19, the disaster humans all over the world are facing this year.
In conclusion, compared with the Manual Temperature Device(COVID-19 Temperature Monitor), the Electrical Temperature Device is faster, safer, and more convenient. As time goes by, the Electrical Temperature Device is getting more and more widely accepted and used.
Temperature Device, Infrared Temperature Device, Heat Detector Temperature, Human Temperature Detection, Temperature Device for Home, COVID-19 Temperature Monitor SHENZHEN SANAN TECHNOLOGY CO.,LTD , https://www.sanan-cctv.com
So what types do the Temperature Devices mainly include?
The Temperature Devices(Heat Detector Temperature) mainly can be divided into the Manual Temperature Device and the Electrical Temperature Device. The Manual Temperature mainly refers to the Mercury Thermometer, one of the most accurate thermometers in the world, which are widely used in all kinds of hospitals and medical institutions. As for the Electrical Temperature Devices(Human Temperature Detection), there are all many types and the most popular ones are the Infrared Thermometer and the Thermal Camera.
What is the Infrared Thermometer?
The Infrared Thermometer(Temperature Device for Home) measures the body temperature via the infrared rays, and it can be divided into the contact Infrared Thermometer and the non-contact Infrared Thermometer; which is relatively safe and accurate when we are doing the body temperature measuring, and it is very suitable for the elderly, children, hospitals and families.
What about the Thermal Camera?
The Thermal Camera measures the body temperature via the infrared rays, too. Except that, the Thermal Camera can show the images of the detected faces(with the temperature marked). Besides, the Thermal Camera can automatically alarm in time once the abnormal body temperture is found. So convenient!
