Winter screw press operation should pay attention!

In most parts of the north, the temperature in the north is relatively low. Therefore, special attention should be paid to the operation of the oil press and the entire oil press. The screw press has only a certain skill in operation and processing to improve the oil extraction rate. The room temperature of the oil press room should be kept at 15 °C - 20 °C. If the temperature is too low, the oil yield and oil quality will be affected. The moisture content of the oil before pressing is suitable. The best moisture content is as follows: peanut 8%-11%, soybean 5%-8%, cottonseed 4%-6%, rapeseed 6%-8%. After the machine is running normally, feed a small amount of oil evenly and slowly to heat the machine and observe whether the cake is in good condition. If it cannot be discharged smoothly, it may be that the gap between the cakes is too small, then turn the adjusting handwheel clockwise. If it is found that the cake is too fast, turn the adjustment hand wheel counterclockwise until it is working normally. Then slowly increase the feed amount to prevent uneven feeding and sudden increase in load, causing blockage. The working temperature of the oil press. If the feed is dry, the machine temperature is higher, and vice versa. In general, the machine tool greenhouse can produce oil at 60 °C. When you touch the body of your body and feel hot, you can put it into normal operation.