Rotary cultivator use and operation precautions
Ningxia
Kofolon International Co.,Ltd make and export Horseradish Granules.We have
our horseradish planting base with 5000 acres.Our horseradish granules is
used for material of Horseradish Paste and for Japanese food,sea food and
fashion food. Our horseradish granules is healthy,natural,spicy and
delicious, and very popular in Japan,Korea,America,Europe,Brazil,Taiwan,South-East
Asia,etc.
We
can make provide you horseradish granules as your request,such as quality,price,packing,etc.
More
details is following.
Season:from
NOV.to FEB.next year.
Packing:20kgs/CTN 25
tons/40`HC
Ingredients:horseradish
Delivery:20
days
MOQ:5TONS
Payment:T/T
Dehydrated Horseradish Granules Dehydrated Horseradish Granules,Horseradish Granules,Dry Horseradish Granules,Dry Spicy Horseradish Granule NINGXIA KOFOLON INTERNATIONAL CO.,LTD. , http://www.kofolon.com
(2) The symmetrically arranged rotary cultivators can enter from any direction of the land when rotating, and the offset (usually offset to the right) of the rotary cultivator should enter from the right of the land to avoid the tractor wheels. Rolling arable land.
(3) When the cultivator is inspected, maintained, and trouble-shooting, the engine must be stopped and extinguished, and the rotary cultivator can be lowered to the ground. If parts need to be replaced, the cultivator must be raised and then replaced.
(4) When transferring the field or passing the field, the rotary cultivator should be lifted to the highest position and the power output shaft power should be cut off. If the road is far away and the unit needs to transfer over a long distance, the rotary cultivator must be fixed at the transport position with a locking mechanism, or the universal joint at one end of the power output shaft must be removed. It is forbidden to sit on the cultivator or stack heavy objects, and it is forbidden to drive at high speed.
(5) When the vehicle is parked, the rotary cultivator shall be used for landing and shall not be hung and parked.
(6) Check the universal joint and the blade installation before work to ensure that it will not fly out.
(7) In the rotary tillage operation, the person behind the rotary cultivator is prohibited.
(8) When the unit starts, the rotary cultivator must be lifted so that the tool tip leaves the ground, and the low speed gear of the power output shaft is hung, so that the rotary cultivator is idled for 1 to 2 minutes. After normal operation, hang the tractor forward gear and loosen the clutch pedal slowly. At the same time, operate the hydraulic suspension lifting handle to slowly insert the rotary plough blade into the soil and then increase the throttle until the normal tilling depth. It is forbidden to plung the rotary tiller into the soil during use, so that the rotary cultivator will be overloaded and will cause the engine to stall or even damage the engine.
(9) When turning the unit, the rotary cultivator must be lifted off the ground, but it should not rise too high to avoid deformation and damage of the rotary cultivator blade and the universal joint.
(10) When the unit is set back, the rotary cultivator must also be raised, otherwise it will cause the rotary tiller to roll back into the soil and damage the parts.
(11) The joystick should be placed in the “floating†position (split type) during rotary tillage operations. After each descent or lifting of the cultivator, the handle should be quickly placed in the "floating" position, not in the "pressure drop" and "neutral" position. When lowering the rotary cultivator, do not use the “pressure drop†position to avoid damage to the implement.
(12) The maximum ploughing depth of the split hydraulic mechanism is limited by the position of the fixed cylinder positioning clamp stopper.
(13) Correct selection of rotary cultivator operation speed: The forward speed of the general dryland rotary cultivator is 2~3km/h, and 3~5km/h when it is used in the depression. For soils with a large specific resistance, the forward speed is selected to be smaller, and the resistance is smaller than the smaller one. At present, most of the tractors' I-files are suitable for large-scale dry tillage, and Level II is suitable for general farmland.