Introduction to the operation of the cover machine

1. When the photoelectricity on the filling machine hopper detects that the cover is lower than the lower position, the blower starts, the two vibrators on the feeding device operate, the cylinder starts to move periodically, and the cover is started.

2. When the photoelectricity on the filling machine hopper detects that the cover is higher than the upper position, the two vibrators on the feeding device stop, and the cylinder is in the initial state (the initial state of the cylinder is that the piston is in the extended state, that is, the baffle is in the blocking position Material state), when the blower delays for 9 seconds (0-60 seconds, adjustable), the cover is stopped.

3. As the cover is gradually used, when the hopper is lowered to the lower position, the cover is fed again, so that the cover machine works reciprocally.

External Fixators Series

Orthopaedic External Fixator,Orthopaedic External Fixation,Near Joint External Fixators ,Orthopedic External Fixation

Jiangsu Health Medical Technology Development Co., Ltd. , https://www.medicalhos.com